As the weather gets colder and the temperature drops, there is a problem with the use of a car dismantling machine. That is, it takes longer and longer to start up, because the colder the temperature is, the longer it takes for the car dismantling machine to warm up. In addition, in the cold winter, the repair and inspection work of the car dismantling machine also greatly increased the difficulty, because the number of scrapped cars in China continues to increase, so in the winter car dismantling work will not reduce, so the car dismantling machine will be normal use, let's look at how to maintain the car dismantling machine in winter!
1. Replace the diesel oil filter of the vehicle scrapping machine, replace the locally applicable thickening oil and oil filter, timely replace the oil leakage in the hydraulic system, and keep the temperature of the fuel tank as far as possible.
2. Clean the dirt on the surface of the dismantler and check whether there are loose fasteners.
3, check whether the anti-freeze liquid level and oil level of the disassembly machine is normal, check whether the oil quality is normal, check the anti-freeze liquid level of fuel.
4. Start the engine for a period of time. If the antifreeze liquid level and oil oil level are lower than the normal oil level, please add to the normal oil level before starting. In cold weather, before starting the engine, place the key in the preheating position until the preheating light is on.
5. If the weather is very cold and the engine is shut down for a long time, please drain the coolant from the engine. To prevent the battery feeder, the battery must be taken out and stored in a warm place.
Contact Person: Mr. Scott Ning
Tel: 86 535 2132368