Hydraulic Breaker is mainly used for mining, railway and highway repair or crushing, building demolition, reinforced concrete crushing, etc. Its operation requires staff to carefully read the operation manual of crushing hammer, prevent damage to crushing hammer and excavator, so as to effectively operate them.

1. Choose the right direction of strike: the direction of strike should be in a straight line with the steel fiber during the operation of crushing hammer. If the strike direction is tilted during operation, the steel fiber may slip and drag, causing the steel fiber and piston to break or get stuck, increasing the wear of the lower sleeve.

2. Appropriate strike force: In order to break effectively, the hammer should choose the appropriate strike force. If the impact force is insufficient, the piston's impact energy cannot be broken effectively. In this case, the counterforce of the impact force will be transmitted to the crushing hammer body and the large arm of the excavator loader, thus damaging these parts. In addition, if the strike force is too large, the machine may suddenly tilt at the moment of crushing, and the crushing hammer will be hit violently, which will cause damage to the crushing hammer. In this state, the working vibration will be transmitted to the walking part of the excavator loader. In order to protect the walking part, the working in this state should be avoided.

3. Precautions during Hydraulic Breaker operation: install protective net to avoid crushing the glass of excavator loader and injuring operators. When the hose vibrates violently, stop the operation. If the crushing hammer hose vibrates violently, it may be a fault, it should be checked in time to avoid damaging the hammer body parts. Avoid air strikes. When the object is broken, air strike should be avoided. If the air strike continues, the bolt of the crushing hammer will become loose or break, and even the excavator loader will be adversely affected.

4, the Hydraulic Breaker flexible and correct operation: for relatively hard large stone, can be broken at the edge of its first, to avoid damage to the hammer body. The Hydraulic Breaker should be operated at the appropriate engine speed. Do not let the Hydraulic Breaker directly fall down to hit the gravel, otherwise the crushing hammer and excavator loader will bear too much force and easily cause component damage.

In conclusion, we found that the operation of the crushing hammer should pay attention to the correct direction and strength of the strike, precautions during the operation of the crushing hammer, flexible and correct operation of the hammer, which can not only reduce the failure of the crushing hammer as far as possible, but also extend its service life and reduce operating accidents.